The Intel ISP Adaptor B2 is used to connect SF600/SF600Plus/SF600Plus-G2 to the Intel motherboard.
Mated with Intel 2x10 connector (Samtec: ASP-159358-03).
The cable length is around 8 cm; a header is added at the end.
※ This adaptor does not work with Quad IO. Please choose "ISP-ADP-intel-C2" for Quad IO.
Table 1: SF600/SF600Plus/SF600Plus-G2 ISP Header Pin Out (2x10)
1 | Vpp | CS2 | 2 | ||
3 | CS1 | VCC | 4 | ||
5 | MISO / DQ1 | HOLD / DQ3 | 6 | ||
7 | WP / DQ2 | CLK | 8 | ||
9 | GND | MOSI / DQ0 | 10 | ||
11 | NC | Reset / IO3 | 12 | ||
13 | NC | NC | 14 | ||
15 | NC | NC | 16 | ||
17 | NC | NC | 18 | ||
19 | GPIO1 | GPIO2 | 20 |
Table 2: Intel ISP Adaptor B Pin Out (2x10)
1 | KEY | CS0 | 2 | ||
3 | RESET | CS1 | 4 | ||
5 | GND | VCC | 6 | ||
7 | CLK | DQ2 / WP | 8 | ||
9 | DQ3/HOLD | MISO | 10 | ||
11 | x | MOSI | 12 | ||
13 | x | x | 14 | ||
15 | x | x | 16 | ||
17 | x | x | 18 | ||
19 | x | x | 20 |
Table 3: Some signals have naming variations between SF600/SF600Plus/SF600Plus-G2 pin out and Intel Adaptor pin out. The following is the matching table.
SF600/SF600Plus/SF600Plus-G2 Connector | Intel Adaptor | ||||
Pin | Signal | Pin | Signal | ||
2 | CS2 | 4 | CS1 | ||
3 | CS1 | 2 | CS0 | ||
4 | VCC | 6 | VCC |
產品 | 檔案類型 | 檔案描述 | 版本 | 下載 | 檔案大小 | 更新日期 |
---|
IC Part Number | Manufacturer | Chip Type |
---|
Socket Adaptor | Package | IC Size - Length(mm) | IC Size - Width(mm) | IC Size - Pitch(mm) | Remark |
---|