The ProgMaster Socket Bottom Board is used to operate off-line programming for 25 series SPI flash memories via programmer. Users can directly use the Pin 2x10 to 2x10 Cable to connect the ProgMaster Socket Bottom Board and the programmer.
Bottom Board Pin Out
SPI | |||
NC | CS2 | ||
CS1 | VCC | ||
MISO/DQ1 | HOLD/DQ3 | ||
WP/DQ2 | CLK | ||
GND | MOSI/DQ0 | ||
NC | RESET/IO3 | ||
GND | IO5/DQ5 | ||
BufVCC | IO6/DQ6 | ||
IO7/DQ7 | IO4/DQ4 | ||
IO1 | IO2 |
J1 & J2 Description
J1 | When using the 8SPI programming socket, J1 must be connected to the Jump, otherwise, please remove the Jump. The 8SPI programming socket can program SPI NOR Flash which supports Octal. IO. | ||
J2 | It will not affect the use if there is a Jump or not. |
產品 | 檔案類型 | 檔案描述 | 版本 | 下載 | 檔案大小 | 更新日期 |
---|
IC Part Number | Manufacturer | Chip Type |
---|
Socket Adaptor | Package | IC Size - Length(mm) | IC Size - Width(mm) | IC Size - Pitch(mm) | Remark |
---|