您使用的浏览器版本过旧,部分功能可能无法使

SO8脚座转板

品名 : EM-AD-SOK-BK-8W
SO8脚座转板
此商品无提供线上购买,如需了解更多,请洽客服专员

Description

The adaptor (SO8W) with 2x4 1.27mm male header is used for EM100 & EM100Pro to connect the 2x4 1.27mm cable to the SO8W SPI socket soldered on the application board. In this way, the user does not need to remove the SPI socket from the board and solder a 2x4 1.27mm male header during development.


Step 1
Remove the SPI Flash from the socket. (Note: If the SPI Flash is in the socket, make sure there is a pull-up resistor on the Hold pin.)
Remove the SPI Flash from the socket. (Note: If the SPI Flash is in the socket, make sure there is a pull-up resistor on the Hold pin.)
Step 2
Connect 2 pieces of 1.27mm 4 pin male header to the SPI socket.
Connect 2 pieces of 1.27mm 4 pin male header to the SPI socket.


Step 3
Connect adaptor to the pin headers on the SPI socket.
Connect adaptor to the pin headers on the SPI socket.


Step 4
Connect 2x4 1.27mm cable to the adaptor.
Connect 2x4 1.27mm cable to the adaptor.

产品 档案类型 档案描述 版本 下载 档案大小 更新日期
IC Part Number Manufacturer Chip Type
Socket Adaptor Package IC Size - Length(mm) IC Size - Width(mm) IC Size - Pitch(mm) Remark